Showing results for 
Search instead for 
Do you mean 

ILO MP

Advisor

ILO MP

Hi ,

 

i want to know the default IP address for rp3440 server ILO MP console.

 

 

8 REPLIES
Acclaimed Contributor Acclaimed Contributor

Re: ILO MP

The default setting is DHCP.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Advisor

Re: ILO MP

I want to change the ip settings, and i dont have suv cable ? kindly advice me how to change the ilo mp ip address ?

 

Acclaimed Contributor Acclaimed Contributor

Re: ILO MP

On older firmware the default is just 127.0.0.1 - you can only change via a serial connection.

 

Newer firmware has a default of DHCP (name is mp followed by the mac address), so if you have an active dhcp server, try to connect the ilo.


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Honored Contributor Honored Contributor

Re: ILO MP

"SUV cable" is the short cable used with blade servers, with the proprietary high-density connector at one end and VGA + USB + serial connectors at the other end.

 

With rp3440, there should be a short "M" cable - the name is because it splits the single DB-25 console connector into three DB-9 serial ports (think of the shape of the letter and how it relates to splitting one large connector into three separate points). The part number of the cable for the rp34xx servers is A6144-63001. Using Google, you may even find its pin-out description.

 

But the DB-25 connector is quite cleverly designed: the wires for the console serial port are in standard locations for a 25-pin serial connector. If you don't have the M cable, try a regular 25-pin serial cable. You will lose the "remote" and "UPS" ports, but the console port should be usable.

MK
Acclaimed Contributor Acclaimed Contributor

Re: ILO MP

To solve your SMH problem (according to your other thread) you probably need a newer version:

https://h20392.www2.hp.com/portal/swdepot/displayProductInfo.do?productNumber=SysMgmtWeb

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
HPE Pro

Re: ILO MP

Hi,

 

Connect to the system console Using Serial port and "CTRL+B" will give access to MP Main Menu.

 

LC comand used to modify the LAN information includes the management processor network name, IP address information, and configuring DHCP and DNS service information.


To configure the management processor LAN IP address:
Step 1. At the MP Main Menu prompt (MP>), enter CM to choose command mode.
Step 2. At the command mode prompt (MP:CM>), enter LC (for LAN configuration).
The screen displays the default values and asks if you want to modify them. It is good practice to write down the information, because you might need it for future troubleshooting.
Step 3. The screen displays the current LC data. When prompted to enter a parameter name, A to modify All, or Q to Quit, enter A to choose all parameters.

Please modify the required parameters.

 

The following screen shows LC command output:
MP:CM> LC -nc
Current LAN Configuration:
MAC Address : 0x0060b0f54c51
DHCP Status : Enabled
IP Address : 127.1.1.1
MP Host Name : maestro
Subnet Mask : 255.255.248.0
Gateway Address : 127.1.1.1
Link State : Auto Negotiate
Web Console Port Number : 2023
SSH Access Port Number : 22
IPMI/LAN Port Number : 626
LAN status: UP and RUNNING
-> Command successful.
MP:CM>

 

 


HTH

Surendar

How to assign KUDOS! Click the STAR!

HP Guided Troubleshooting - www.hp.com/support/hpgt

I work for HPE

If you feel this solution was helpful please click the KUDOS! thumb below!
Acclaimed Contributor Acclaimed Contributor

Re: ILO MP

If I remember correctly the problem is, he has no serial cable ...

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Highlighted
HPE Pro

Re: ILO MP

Hi Torsten,

 

Thank You :-)

I work for HPE

If you feel this solution was helpful please click the KUDOS! thumb below!