HP SoftPaq Download Manager
Showing results for 
Search instead for 
Do you mean 

FAQ(04): Can SDM display only the latest SoftPaqs?

SOLVED
Go to Solution
Highlighted
Honored Contributor

FAQ(04): Can SDM display only the latest SoftPaqs?

[ Edited ]

I would like for SDM to show my only the latest SoftPaqs in "All Products" or "Personal" modes. How can I do this?

1 REPLY
Trusted Contributor Trusted Contributor

Re: FAQ(04): Can I display only the latest SoftPaqs in SDM for my selected models?

[ Edited ]

If you select the "Show software for this model only." option when SDM starts up, the latest SoftPaqs will be displayed for the unit running SDM by default.

If you select the "Show software for all supported models." option when SDM starts up, the default mode is to display all Available SoftPaqs for your selected models. You can, however, display the latest SoftPaqs if you limit your selection to one and only one product family, model, operating system and language. After selecting your ONE model, OS and language, press the "Find Available SoftPaqs" button (located on the top left portion of the SDM window) and finally press the "Show Latest SoftPaqs" button on the top right portion of the SDM window. This will display the latest SoftPaqs for the selected model.

And, after following the "Show latest SoftPaqs" process outlined above, if you still see more than one version of a SoftPaq, please write an email to sdm.support@_nospam_hp.com (please remove _nospam_ from the email address for the real one). Please include the model, operating system, SoftPaq numbers, deliverable name(s) and versions.

Note: in "Update" mode, SDM will only display the latest SoftPaqs for the detected model.