Add hard drive in HPUX 11

[Frank Lugo]

I am new to HPUX and I need to add a hard drive to our HPUX box we have. Is this just like any other hard drive install on a *nix platform?

Any advice on how this is done is greatly appreciated.

this is my system specs
OS Version: HP-UX B.11.11
System Model: 9000/777/C110
Processor Count/Type: 1 / 120 MHZ
Memory Physical/Swap: 224 / 469 MB

[Sandy Chen]

Hi,

Perhaps these links could help you

http://forums1.itrc.hp.com/service/forums/questionanswer.do?threadId=1083334

http://forums1.itrc.hp.com/service/forums/questionanswer.do?threadId=1018923

regards,
Sandy

[Sivakumar TS]

Hi Frank,

Once you add the hardware (disk) in the system, the procedure to make the disk accessble from HPUX depends on the volume manager that we use,

the below link has a excellent doc with the procedures for LVM,

www.docs.hp.com/en/5991-1236/When_Good_Disks_Go_Bad.pdf

HTH,

Siva