HPE BladeSystem Chassis, Power & Cooling
Showing results for 
Search instead for 
Do you mean 

C3000 Minimum Power supplies

SOLVED
Go to Solution
Occasional Advisor

C3000 Minimum Power supplies

Hi,

 

I cant seem to find the answer anywhere, but what is the minimum ammount of power supplies that can be used in a C3000 enclosure when the enclosure has all 8 bays filled?

 

Thanks

Tim

 

1 ACCEPTED SOLUTIONS
Highlighted
HPE Pro

Re: C3000 Minimum Power supplies

Hi Tim, 

 

The HP BladeSystem c3000 Enclosure ships with two power supplies. However, up to six power supplies can be installed, depending on the AC redundancy level required and the number of devices installed in the enclosure. BladeSystem c3000 single-phase power supplies automatically switch between low-line (120 VAC) and high-line (240 VAC) to support both environments. A pooled power backplane delivers power to the enclosure. This ensures that the full capacity of the power supplies is available to all server blades.

 

For more informaion refer the "Power Specifications" on C3000 enclosure QuickSpec document: 

http://h18000.www1.hp.com/products/quickspecs/12790_div/12790_div.HTML#Power Specifications

 

Refer c-Class BladeSystem BladeSystem Power Sizer Available at: http://www.hp.com/go/bladesystem/powercalculator

 

The HP Power Advisor allows for the mixing of rack, blade, and other products in a single environment available at: http://www.hp.com/go/hppoweradvisor

 

Also, refer the HP BladeSystem c3000 Enclosures configurtion at HPGT: 

http://h20584.www2.hp.com/hpgt/guides/select?lang=en&cc=us&prodTypeId=3709945&prodSeriesId=3540808&l...

 

Regards, 

Murali Mohan 

Was this post useful? - You may click the KUDOS! thumb below to say thank you...
1 REPLIES
Highlighted
HPE Pro

Re: C3000 Minimum Power supplies

Hi Tim, 

 

The HP BladeSystem c3000 Enclosure ships with two power supplies. However, up to six power supplies can be installed, depending on the AC redundancy level required and the number of devices installed in the enclosure. BladeSystem c3000 single-phase power supplies automatically switch between low-line (120 VAC) and high-line (240 VAC) to support both environments. A pooled power backplane delivers power to the enclosure. This ensures that the full capacity of the power supplies is available to all server blades.

 

For more informaion refer the "Power Specifications" on C3000 enclosure QuickSpec document: 

http://h18000.www1.hp.com/products/quickspecs/12790_div/12790_div.HTML#Power Specifications

 

Refer c-Class BladeSystem BladeSystem Power Sizer Available at: http://www.hp.com/go/bladesystem/powercalculator

 

The HP Power Advisor allows for the mixing of rack, blade, and other products in a single environment available at: http://www.hp.com/go/hppoweradvisor

 

Also, refer the HP BladeSystem c3000 Enclosures configurtion at HPGT: 

http://h20584.www2.hp.com/hpgt/guides/select?lang=en&cc=us&prodTypeId=3709945&prodSeriesId=3540808&l...

 

Regards, 

Murali Mohan 

Was this post useful? - You may click the KUDOS! thumb below to say thank you...