HPE BladeSystem Chassis, Power & Cooling
Showing results for 
Search instead for 
Do you mean 

HP Blade System C7000 Enclosure - Alerts Mail from onboard admin

SOLVED
Go to Solution
Occasional Advisor

HP Blade System C7000 Enclosure - Alerts Mail from onboard admin

Hi everyone,

 

i'm searching on the hp website for a while now, trying to find the event description manual for the  alerts mail from the c7000 enclosure onboard admin, but without luck.

 

can you please link me the document?

1 ACCEPTED SOLUTIONS
Highlighted
HPE Pro

Re: HP Blade System C7000 Enclosure - Alerts Mail from onboard admin

Hi,

 

You may configure the alert mail from C7000 enclosure Onboard administrator from Enclosure settings > Alert E-mail option.

 

1. Select the Enable AlertMail checkbox to enable the AlertMail feature.

2. Enter values for the e-mail address, alert sender domain, and SMTP server.

3. Click Apply to save settings.

 

AlertMail, if enabled, sends alerts by e-mail for the following events:

 

Enclosure status change

Enclosure information change

Fan status change

Fan inserted

Fan removed

Power supply status

Power supply inserted

Power supply removed

Power supply overload

Blade inserted

Blade removed

Blade status

Blade thermal condition

Blade fault

Blade information change

Tray status change

Tray reset

Switch connect

Switch disconnect

 

For more info refer the below manual pagenumber 71-72:

 

http://bizsupport2.austin.hp.com/bc/docs/support/SupportManual/c00705292/c00705292.pdf

 

I hope the info will help you, if so click on the Kudo Star.

 

Regards,

 

Renji V

 

I am an HP employee.

Was this post useful? -
To say thanks click the "thumbs up" icon below!!! .....
3 REPLIES
Highlighted
HPE Pro

Re: HP Blade System C7000 Enclosure - Alerts Mail from onboard admin

Hi,

 

You may configure the alert mail from C7000 enclosure Onboard administrator from Enclosure settings > Alert E-mail option.

 

1. Select the Enable AlertMail checkbox to enable the AlertMail feature.

2. Enter values for the e-mail address, alert sender domain, and SMTP server.

3. Click Apply to save settings.

 

AlertMail, if enabled, sends alerts by e-mail for the following events:

 

Enclosure status change

Enclosure information change

Fan status change

Fan inserted

Fan removed

Power supply status

Power supply inserted

Power supply removed

Power supply overload

Blade inserted

Blade removed

Blade status

Blade thermal condition

Blade fault

Blade information change

Tray status change

Tray reset

Switch connect

Switch disconnect

 

For more info refer the below manual pagenumber 71-72:

 

http://bizsupport2.austin.hp.com/bc/docs/support/SupportManual/c00705292/c00705292.pdf

 

I hope the info will help you, if so click on the Kudo Star.

 

Regards,

 

Renji V

 

I am an HP employee.

Was this post useful? -
To say thanks click the "thumbs up" icon below!!! .....
Occasional Advisor

Re: HP Blade System C7000 Enclosure - Alerts Mail from onboard admin

thx a lot, i don't know how did i miss it. 

Occasional Visitor

Re: HP Blade System C7000 Enclosure - Alerts Mail from onboard admin

Thank You for this information, very good!

I took a look through the ilo scripting tools examples but didn't see this. Is there any way to script the enabling of alertmail on all of our enclosures and rack mounted servers?