HP Blade System C7000 Enclosure - Alerts Mail from onboard admin

[Hayate]

Hi everyone,

i'm searching on the hp website for a while now, trying to find the event description manual for the  alerts mail from the c7000 enclosure onboard admin, but without luck.

can you please link me the document?

[Renjiv · Accepted solution]

Hi,

You may configure the alert mail from C7000 enclosure Onboard administrator from Enclosure settings > Alert E-mail option.

1. Select the Enable AlertMail checkbox to enable the AlertMail feature.

2. Enter values for the e-mail address, alert sender domain, and SMTP server.

3. Click Apply to save settings.

AlertMail, if enabled, sends alerts by e-mail for the following events:

Enclosure status change

Enclosure information change

Fan status change

Fan inserted

Fan removed

Power supply status

Power supply inserted

Power supply removed

Power supply overload

Blade inserted

Blade removed

Blade status

Blade thermal condition

Blade fault

Blade information change

Tray status change

Tray reset

Switch connect

Switch disconnect

For more info refer the below manual pagenumber 71-72:

http://bizsupport2.austin.hp.com/bc/docs/support/SupportManual/c00705292/c00705292.pdf

I hope the info will help you, if so click on the Kudo Star.

Regards,

Renji V

[Hayate]

thx a lot, i don't know how did i miss it. 

[Wrentham636]

Thank You for this information, very good!

I took a look through the ilo scripting tools examples but didn't see this. Is there any way to script the enabling of alertmail on all of our enclosures and rack mounted servers?

[p4h0ntu]

Hello,

I try to add more e-mail address separeted whit " : , but i got the error message: The submitted E-mail address is not valid.

How can i add more e-mail addresses ?

Thank you!