HPE BladeSystem Chassis, Power and Cooling
Showing results for 
Search instead for 
Do you mean 

Problem I / O mismatch detected, BL460c G6 Blade c7000

SOLVED
Go to Solution
Highlighted
Super Advisor

Problem I / O mismatch detected, BL460c G6 Blade c7000

Hi all, I have a problem in a c7000 blade chassis HP.

The configuration of the interface modules is:

Bay1-HP VC-Enet Module 1/10Gb
Bay2 - HP VC-Enet Module 1/10Gb
Bay3 - Brocade 4/12 SAN Switch for HP c
Bay4 - Brocade 4/12 SAN Switch for HP c

OnBoard Version: Firmware Version: 3.70

When I connect a blade of this type:

Model: ProLiant BL460c G6
Manufacturer: HP
Part Number: 507780-B21
Mezz 1
Model: QLogic iSCSI adapter QMH4062
Manufacturer: QLogic
Part Number: 488074-B21
Product View: 0A


When the QLogic FC card is plugged in Position 1, I get this error:

 


I / O mismatch detected. Plesase see port mapping information

 



thank you very much

2 REPLIES
Honored Contributor

Re: Problem I / O mismatch detected, BL460c G6 Blade c7000

[ Edited ]

hi,

 

It looks that You are trying to connect a ethernet mezzanine card to a fibre channel VC module.

 

QMH4062 is a ethernet mezzanine card.

 

Thanks

 

regards,

How to Say Thank You? Just click the KUDOS Star!
Super Advisor

Re: Problem I / O mismatch detected, BL460c G6 Blade c7000

PGTRI Hello, thanks for answering, you're right, it was a mistake of mine, I did not watch the card.

thank you very much