BladeSystem - General
1745781 Members
3519 Online
108722 Solutions
New Discussion

HP ILO access issue through Web interface , ssh and console

 
kodeswarank
Visitor

HP ILO access issue through Web interface , ssh and console

Hi everyone,

 

I am facing below problems while accessing ILO. ping command still works, i got a reply from ilo but,

 

1. Not able to connect through ILO web interface .

2. Not able to connect through SSH.

3. Not able to connect through ILO  remote console.

 

Please help me out of this.

 

Thanks in advance.

2 REPLIES 2
Oscar A. Perez
Honored Contributor

Re: HP ILO access issue through Web interface , ssh and console

Is this iLO2?  Have you run a security scanner lately?

 

See this CA

h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/kb/docDisplay/?docId=emr_na-c04249852-1

 

 

 




__________________________________________________
If you feel this was helpful please click the KUDOS! thumb below!
kodeswarank
Visitor

Re: HP ILO access issue through Web interface , ssh and console

Hi Oscar,

I am using ILO3.

FYI, i am having enclosure c7000 with 16 blades.

All blade firmwares are accessible through web interface, ssh and through console.

But bay 1 firmware is not accessible through any of the methods.

I don't know the exact problem here.