HPE BladeSystem Management Software
Showing results for 
Search instead for 
Do you mean 

HP SPP does not detect correct Windows drivers

Occasional Visitor

HP SPP does not detect correct Windows drivers

I am booting from the SPP 2013.09.0(B) ISO to update firmware on a BL460c G7 running Windows Server 2008 R2. When I run through the wizard, it detects the server 'type' as Linux and not Windows. When it continues, it lists the Linux drivers to install, rather than the ones required for this Windows server. Is this a known issue, or am I missing something ?
1 REPLY
Highlighted
Acclaimed Contributor Acclaimed Contributor

Re: HP SPP does not detect correct Windows drivers

If you boot the SPP, it runs linux from the CD.

The screen will list FIRMWARE to update, if you see linux DRIVERS, ignore them.

To update drivers, start HPSUM from running windows!

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!