Setting SNMP Trap across a large number of OA's

[chuckk281]

Question from Jim:

******************

Hopefully someone has a quick answer on this

I have several hundred OA’s need to have the SNMP updated – adding a trap destination

Is there a scripting convention that can be leveraged to accomplish this? We are across the spectrum for firmware versions.

**************

Reply from Scott:

**************

I suggest this;

#Set SNMP Information

SET SNMP CONTACT ""

SET SNMP LOCATION ""

SET SNMP COMMUNITY READ "public"

SET SNMP COMMUNITY WRITE ""

DISABLE SNMP

********

Any other input for Jim?