HPE BladeSystem Management Software
Showing results for 
Search instead for 
Do you mean 

Updating LDAP information on multiple chassis

SOLVED
Go to Solution
Occasional Visitor

Updating LDAP information on multiple chassis

Is there any type of tool/utility to add ldap information on multiple blade chassis, instead of doing it one at a time ?

1 ACCEPTED SOLUTIONS
Respected Contributor

Re: Updating LDAP information on multiple chassis

I use Plink and a batch file that calls a text file with the commands.  If you do a show all on a known good OA you can just pull those LDAP commands out.   

 

You'll see it the "#Set LDAP Information" section.

 

The batch file is plink -ssh username@chassis -pw password -m ldap.txt

 

2 REPLIES
Respected Contributor

Re: Updating LDAP information on multiple chassis

I use Plink and a batch file that calls a text file with the commands.  If you do a show all on a known good OA you can just pull those LDAP commands out.   

 

You'll see it the "#Set LDAP Information" section.

 

The batch file is plink -ssh username@chassis -pw password -m ldap.txt

 

Occasional Visitor

Re: Updating LDAP information on multiple chassis

Thank you. I'll go ahead and try this.