BladeSystem - General
1748211 Members
4735 Online
108759 Solutions
New Discussion

VCEM 7.2 with VC 4.01 and adding a bare metal enclosure to VC domain group

 
chuckk281
Trusted Contributor

VCEM 7.2 with VC 4.01 and adding a bare metal enclosure to VC domain group

Pierre had a VCEM question:

 

************

 

This is new installation of VCEM 7.2, I create a VC Domain group by importing a VC domain configure with uplink, network, fabric, but no server profiles. I have configure three local users and change the default password for the local Administrator. After I did add a second enclosure in the same VC domain group, this enclosure is bare metal, with OA configure and VC is not configured. After the integration of the second enclosure, the VC domain in the second enclosure did get configured properly for the Ethernet and SAN. But the three user accounts in the original VC domain did not get replicated in the second VC domain. Is this normal, and we have to manually configure local user account.

 

************

 

Info from Fred:

 

***************

 

That’s correct. VCEM doesn’t propagate user account settings amongst member domains in the domain group. The VCEM UG: http://bizsupport2.austin.hp.com/bc/docs/support/SupportManual/c03667973/c03667973.pdf has information on which settings VCEM propagates.

 

************

 

Other questions or comments?