1748151 Members
3310 Online
108758 Solutions
New Discussion юеВ

BL460c CNA and Linux

 
EricDuncan
Collector

BL460c CNA and Linux

I have a BL460c with a HP FlexFabric 10Gb 2-Port 534FLB Adapter running RHEL 5.10. Everything is working great but SAN connectivity. How do you get this to see the CNA as a FC HBA? I came close to getting the FcoE drivers to work but a no go. Can someone assist or point me in the correct direction?

 

Thanks!

2 REPLIES 2
TVVJ
HPE Pro

Re: BL460c CNA and Linux

 

If Virtual Connect module is not installed, then run RBSU by rebooting the server and pressing the F9 key during boot prompt. Under menu System Options > NIC Personality Options > Select the controller and then press тАШenterтАЩ key to list the personality choices and then choose FCoE to set personality for FC connectivity.

 

If Virtual Connect module is installed, then the profile settings take precedence and hence make the settings in Virtual Connect Manager (VCM) or Virtual Connect Enterprise Manager (VCEM).

 

Regards,

 

Vijayasarathy

I work for HPE
Views expressed herein are my personal opinion and are not the views of HPE

Accept or Kudo

EricDuncan
Collector

Re: BL460c CNA and Linux

The profile looks correct. It has the network and HBA's set with WWN's. I checked to see if the BIOS had that option and it does not. What else can I check?

 

Thanks

 

Eric