HPE BladeSystem Network Blades
Showing results for 
Search instead for 
Do you mean 

Help choosing network blades

Occasional Visitor

Help choosing network blades

Hi All,


I have x3 ProLiant G7 blades in a C7000 chassis.


We will be purchasing a TS-EC1279U-SAS-RP (QNAP 12bay NAS /w 10Gb ethernet), we also have an existing HP MSL4048 tape system.


What network blades will I need to purchase to have the 10Gb ethernet NAS and the HP MSL4048 tape system (fiber channel) plugged into the C7000 chassis.


The NAS will house the VM's as well as the companys file shares. The tape system is to take backups of this.


I have been thrown in the deep end here to put something together

Any help appreciated. Many thanks

Acclaimed Contributor Acclaimed Contributor

Re: Help choosing network blades

What type of interconnects your C7000 currently have (rear side modules)?

Hope this helps!


There are only 10 types of people in the world -
those who understand binary, and those who don't.


No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!