HPE BladeSystem Server Blades
Showing results for 
Search instead for 
Do you mean 

1610-Temperature violation detected after CPU upgrade on two BL460c (first generation)

SOLVED
Go to Solution
Honored Contributor Honored Contributor

1610-Temperature violation detected after CPU upgrade on two BL460c (first generation)

Hi,

 

We've got a couple of BL460c's that we've just added second CPUs in to.

 

During the POST they both report the error:

 

1610-Temperature violation detected

     Waiting 5 minutes for system to cool

     Press Esc key to resume booting without waiting for the system to cool.

WARNING: Pressing Esc is NOT recommended as the system may shutdown unexpectedly

 

The blades are well cooled, so I don't think they are really over temperature.

BIOS firmware had been upgraded to the latest, but they still display the same message and shutdown after a few seconds, even if Esc is pressed.

 

The only way I can get the servers to stay up is to remove the second processor.

 

Anybody have any idea what the issue could be ?

 

Regards,

 

Rob

2 REPLIES
Honored Contributor Honored Contributor

Re: 1610-Temperature violation detected after CPU upgrade on two BL460c (first generation)

Turns out the error was correct.

 

The CPUs had been fitted without their heat sinks...

 

Regards,

 

Rob

Valued Contributor

Re: 1610-Temperature violation detected after CPU upgrade on two BL460c (first generation)

Heh heh, gotta love it.