HPE BladeSystem Server Blades
Showing results for 
Search instead for 
Do you mean 

BL8x0c i2 - How do you locate the HP Smart Array P410i Controller

Occasional Contributor

BL8x0c i2 - How do you locate the HP Smart Array P410i Controller

[ Edited ]

I am trying to see if there is a way to find out the firmware version of the BL890c i2 blade HP Smart Array P410i Controller that my system is running.  I am not in a position to shut it down, as I think it does display it during boot time.  Is there a way to view the version through an OpenVMS lexical, or from the iLO?   Thanks!

 

 

P.S. This threadhas been moved from Servers > Integrity Servers to HP BladeSystem Virtual Connect. - Hp Forum MOderator

1 REPLIES
Highlighted
HPE Pro

Re: BL8x0c i2 - How do you locate the HP Smart Array P410i Controller

Hi,

 

you may either check the console log on the iLO for the last boot up or use MSA$UTIL.

 

The console log on iLO (hpiLO-> CL) should contain a line like the following for each P410i controller:
  HP Smart Array P410i Controller (version 5.16)
  Currently the controller is in RAID mode

 

The MSA$UTIL should give firmware information with the show version command (MSA> show version).

 

Kind Regards

Holger

Was this post useful? - You may click the KUDOS! Star.

- I work for Hewlett Packard Enterprise -