Carrier for a BL460 next to Fullheight server in C7000 ?

[chuckk281]

Erik had a configuration question:

*****************

Before inserting a FullHeight blade in a C7000 the center “carrier” for Half-Height Blades must be removed.

This means that the upper slot can not be used for HH blades.

Question:

? Do we have a “Carrier” for the lower HH blade that can support a upper blade ?

? If so what is the part no ?

********************

Reply from Dave

***********************

There is no half height carrier for the c7000 enclosure. The only supported way to have a half height blade in the upper slot next to a full height blade is with a PCI, storage or tape blade in the lower slot. The customer must keep in mind that the upper blade would need to be removed if the lower unit needed to be pulled for service…

*********************

Comments or questions?