HPE BladeSystem Server Blades
Showing results for 
Search instead for 
Do you mean 

Firmware update of NC551i fails using Service Pack 2013.09

SOLVED
Go to Solution
Occasional Advisor

Firmware update of NC551i fails using Service Pack 2013.09

Hi

 

I'm trying to update the firmware on our NC551i (installed in a BL465G7) using Service Pack 2013.09 (cp019369), but the update fails. The installed firmware is 2.102.453.0. The server runs ESXi 5.0.

 

Flash Engine exit code: 2

Flash complete [7]

 

Return code: 7

1 ACCEPTED SOLUTIONS
Visitor

Re: Firmware update of NC551i fails using Service Pack 2013.09

Had a similar issue last week and was able to update using the Emulex OneConnect iso:

 

http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5033634&sp...

 

 

Using SUM online on Windows blades I've not had this problem.  Also not had this problem offline on blades that have newer firmwares to begin with.

3 REPLIES
Visitor

Re: Firmware update of NC551i fails using Service Pack 2013.09

Had a similar issue last week and was able to update using the Emulex OneConnect iso:

 

http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5033634&sp...

 

 

Using SUM online on Windows blades I've not had this problem.  Also not had this problem offline on blades that have newer firmwares to begin with.

Highlighted
Occasional Advisor

Re: Firmware update of NC551i fails using Service Pack 2013.09

Worked for me too

Occasional Contributor

Re: Firmware update of NC551i fails using Service Pack 2013.09

It's Works for me too..

 

thanks

Armando Medina
Field Service Engineer
HP Enterprise Business Mexico
armando.medina@hp.com
APS; BladeSystem & StoreSure & StoreEver