BladeSystem - General
1748032 Members
4553 Online
108757 Solutions
New Discussion

Remove Flex-10 Flexnic from BL465C G6

 
SOLVED
Go to solution
MaydayIT
Occasional Contributor

Remove Flex-10 Flexnic from BL465C G6

Hi all.

 

We've recendly made some network changes, and no longer need two of the FlexNICs we had previously used.  I removed these from Virtual Connect, but they still show in the BIOS setup, and are presented to operating systems (VMware in this case).  How do I get rid of these unneeded NICs?

 

Thanks in advance for any assistance you can offer.

3 REPLIES 3
Jimmy Vance
HPE Pro

Re: Remove Flex-10 Flexnic from BL465C G6

These two links should provide information your looking for

 

http://www.v-front.de/2011/06/how-to-hide-unused-flexnics.html

 

http://h20565.www2.hp.com/hpsc/doc/public/display?docId=emr_na-c03923055

 

 

 

 

No support by private messages. Please ask the forum! 
msh_it
Regular Advisor
Solution

Re: Remove Flex-10 Flexnic from BL465C G6

Hi

 

What is the firmware of the virtual connect, in newer version there is an option to hide unused NICs.

 

 

-------------------------------

msh_it | UAE | AbuDhabi

If you feel this was helpful please click the KUDOS! Below!
MaydayIT
Occasional Contributor

Re: Remove Flex-10 Flexnic from BL465C G6

Yes, I found that while digging for the answer, and sadly, I'm one version behind and need to stay there until I can retire an old server being used as an ISCSI box.

 

Thanks for responding though.

 

BTW, for anyone else looking for this, you must be on VC firmware 4.31 to see this option.  We're at 4.30 :(.