BladeSystem - General
1745853 Members
4258 Online
108723 Solutions
New Discussion

Re: HP 1/10Gb VC Enet Module 399593-B22 FW Upgrade from 1.21

 
Renato Marchesani
Occasional Advisor

HP 1/10Gb VC Enet Module 399593-B22 FW Upgrade from 1.21

Hello, I'm trying to upgrade the firmware of my two HP 1/10Gb VC Enet Modules, now at version 1.21. They're inside a BlC-3000 Enclosure and so far, it gives me full green checkmarks for the health check

I tried to ugrade using the web ui but it results in an endless progress bar; then I used HP SUM 7.1.0 but it fails with the below log. (same outcome for 3.60-3.62 fw versions)

Also using VCSU fails with a
[Tue Jul 28 17:39:04 2015] (8692)[VcsuCore.cpp:5652] : Error in getting Server Power Status
[Tue Jul 28 17:39:04 2015] (8692)[GetDomainInfo.cpp:140] : Error in getting server power status

 

Is there anyone who can point me out to a correct upgrade path?

Thanks in advance

 

Source:   cp023304.exe
Version:  4.10
Log Date: 7/29/2015 12:52:05 PM

Unsupported Module at Enclosure Serial Number:Bay Number
CZC82665GQ:1Unsupported Module at Enclosure Serial Number:Bay Number
CZC82665GQ:2
[Wed Jul 29 12:52:05 2015] (10680)[VcsuInit.cpp:439] : VCSU Library Version: 1.9.1.1
[Wed Jul 29 12:52:06 2015] (10680)[GetRemoteEndpointInfo.cpp:91] : OA found at 10.1.1.1 with version 4.30
[Wed Jul 29 12:52:08 2015] (10680)[VcsuCore.cpp:388] : Target name: BladeSystem c3000 Tower Enclosure
[Wed Jul 29 12:52:08 2015] (10680)[OaWrap.cpp:823] : OA IP Address: 10.1.1.1
[Wed Jul 29 12:52:08 2015] (10680)[OaWrap.cpp:829] : OA1 IP Address: 10.1.1.1
[Wed Jul 29 12:52:09 2015] (10680)[VcsuInit.cpp:560] : [CZC82665GQ] OA Version: 4.30
[Wed Jul 29 12:52:10 2015] (10680)[OaWrap.cpp:443] : Onboard Administrator Role: Active
[Wed Jul 29 12:52:38 2015] (10680)[OaWrap.cpp:443] : Onboard Administrator Role: Active
[Wed Jul 29 12:52:41 2015] (10680)[VcsuCore.cpp:5466] : Bay 1 IP Address is 10.1.1.2 and type is IPv4
[Wed Jul 29 12:52:42 2015] (10680)[VcsuSsh.cpp:143] : Connection established to 10.1.1.2
[Wed Jul 29 12:52:42 2015] (10680)[VcsuSsh.cpp:163] : Successfully established session to 10.1.1.2
[Wed Jul 29 12:52:42 2015] (10680)[VcsuCore.cpp:650] : Bay 1 Firmware Version: 1.21 2007-10-15T05:35:49Z
[Wed Jul 29 12:52:43 2015] (10680)[VcsuSsh.cpp:143] : Connection established to 10.1.1.2
[Wed Jul 29 12:52:43 2015] (10680)[VcsuSsh.cpp:163] : Successfully established session to 10.1.1.2
[Wed Jul 29 12:52:45 2015] (10680)[VcsuCore.cpp:5466] : Bay 2 IP Address is 10.1.1.3 and type is IPv4
[Wed Jul 29 12:52:45 2015] (10680)[VcsuSsh.cpp:143] : Connection established to 10.1.1.3
[Wed Jul 29 12:52:46 2015] (10680)[VcsuSsh.cpp:163] : Successfully established session to 10.1.1.3
[Wed Jul 29 12:52:46 2015] (10680)[VcsuCore.cpp:650] : Bay 2 Firmware Version: 1.21 2007-10-15T05:35:49Z
[Wed Jul 29 12:52:47 2015] (10680)[VcsuSsh.cpp:143] : Connection established to 10.1.1.3
[Wed Jul 29 12:52:47 2015] (10680)[VcsuSsh.cpp:163] : Successfully established session to 10.1.1.3
[Wed Jul 29 12:52:48 2015] (10680)[VcsuCore.cpp:1935] : Module not present in bay 3
[Wed Jul 29 12:52:50 2015] (10680)[VcsuCore.cpp:1935] : Module not present in bay 4
[Wed Jul 29 12:52:50 2015] (10680)[VcsuInit.cpp:721] : OA VC Mode is set
[Wed Jul 29 12:52:54 2015] (10680)[VcsuCore.cpp:1798] : [CZC82665GQ:1] Primary VCM Found at : 10.1.1.3
[Wed Jul 29 12:52:54 2015] (10680)[VcsuCore.cpp:1894] : [CZC82665GQ:2] Primary VCM found
[Wed Jul 29 12:52:54 2015] (10680)[VcsuSsh.cpp:143] : Connection established to 10.1.1.2
[Wed Jul 29 12:52:55 2015] (10680)[VcsuSsh.cpp:163] : Successfully established session to 10.1.1.2
[Wed Jul 29 12:52:55 2015] (10680)[VcsuSftp.cpp:1451] : File doesn't exist
[Wed Jul 29 12:52:57 2015] (10680)[OaWrap.cpp:1435] : OA Soap Call failed with error 404
[Wed Jul 29 12:52:59 2015] (10680)[VcmWrap.cpp:1643] : VCM Firmware Version: 1.21
[Wed Jul 29 12:52:59 2015] (10680)[VcsuCore.cpp:1262] : VCM IP Address: 10.1.1.3
[Wed Jul 29 12:52:59 2015] (10680)[VcsuCore.cpp:1263] : VCM Firmware Version: 1.21
[Wed Jul 29 12:52:59 2015] (10680)[VcsuCore.cpp:1017] : Domain configuration is present
[Wed Jul 29 12:53:01 2015] (10680)[VcsuCore.cpp:1031] : This is primary enclosure
[Wed Jul 29 12:53:03 2015] (10680)[VcsuInit.cpp:782] : VCM user authenticated successfully
[Wed Jul 29 12:53:05 2015] (10680)[VcmWrap.cpp:1643] : VCM Firmware Version: 1.21
[Wed Jul 29 12:53:25 2015] (10680)[VcsuCore.cpp:1798] : [CZC82665GQ:1] Primary VCM Found at : 10.1.1.3
[Wed Jul 29 12:53:32 2015] (10680)[VcsuCore.cpp:5234] : VCM is in Unlocked mode
[Wed Jul 29 12:53:36 2015] (10680)[VcsuCore.cpp:5064] : User has domain privileges
[Wed Jul 29 12:53:38 2015] (10680)[VcmWrap.cpp:1643] : VCM Firmware Version: 1.21
[Wed Jul 29 12:53:38 2015] (10680)[VcsuCore.cpp:1894] : [CZC82665GQ:2] Primary VCM found
[Wed Jul 29 12:53:39 2015] (10680)[VcsuSsh.cpp:143] : Connection established to 10.1.1.3
[Wed Jul 29 12:53:39 2015] (10680)[VcsuSsh.cpp:163] : Successfully established session to 10.1.1.3
[Wed Jul 29 12:53:44 2015] (10680)[VcsuCore.cpp:1798] : [CZC82665GQ:1] Primary VCM Found at : 10.1.1.3
[Wed Jul 29 12:53:54 2015] (10680)[VcsuFirmware.cpp:42] : Downloading from remote URL: http://10.1.3.55:63001/l3/bp002203/cp023304/vcfwall410.bin
[Wed Jul 29 12:53:55 2015] (10680)[VcDownload.cpp:1511] : Download succeeded
[Wed Jul 29 12:53:55 2015] (10680)[VcsuFirmware.cpp:617] : Verifying package signature...
[Wed Jul 29 12:53:57 2015] (10680)[VcsuFirmware.cpp:635] : Extracting package
[Wed Jul 29 12:54:23 2015] (10680)[Extract.cpp:124] : Done extracting PackageDesc.xml from VCpackage.tar
[Wed Jul 29 12:54:27 2015] (10680)[Extract.cpp:124] : Done extracting vcenet.img from VCpackage.tar
[Wed Jul 29 12:54:32 2015] (10680)[Extract.cpp:124] : Done extracting vcenetfcoe.img from VCpackage.tar
[Wed Jul 29 12:54:36 2015] (10680)[Extract.cpp:124] : Done extracting vcg2enet.img from VCpackage.tar
[Wed Jul 29 12:54:39 2015] (10680)[Extract.cpp:124] : Done extracting vcfc.img from VCpackage.tar
[Wed Jul 29 12:54:42 2015] (10680)[Extract.cpp:124] : Done extracting vcfc2.img from VCpackage.tar
[Wed Jul 29 12:54:50 2015] (10680)[VcsuFirmware.cpp:647] : Parsing package information
[Wed Jul 29 12:54:50 2015] (10680)[Extract.cpp:124] : Done extracting PackageDesc.xml from VCpackage.tar
[Wed Jul 29 12:54:50 2015] (10680)[Extract.cpp:124] : Done extracting ReleaseNotes.txt from VCpackage.tar
[Wed Jul 29 12:54:50 2015] (10680)[VcsuFirmware.cpp:312] : Information for module type VC-G2ENETFCOE is not available in this package
[Wed Jul 29 12:54:50 2015] (10680)[VcsuFirmware.cpp:537] : xml_get_module_Info VC-G2ENETFCOE failed for PackageDesc.xml
[Wed Jul 29 12:54:50 2015] (10680)[VcsuFirmware.cpp:707] : ReleaseNotes.htm saved in current directory
[Wed Jul 29 12:54:50 2015] (10680)[VcsuCore.cpp:1894] : [CZC82665GQ:2] Primary VCM found
[Wed Jul 29 12:54:50 2015] (10680)[VcsuCore.cpp:1894] : [CZC82665GQ:2] Primary VCM found
[Wed Jul 29 12:54:50 2015] (10680)[VcsuCore.cpp:1894] : [CZC82665GQ:2] Primary VCM found
[Wed Jul 29 12:54:50 2015] (10680)[VcsuCore.cpp:2353] : Checking state of any incompleted firmware updates.
[Wed Jul 29 12:54:50 2015] (10680)[VcsuSsh.cpp:143] : Connection established to 10.1.1.2
[Wed Jul 29 12:54:50 2015] (10680)[VcsuSsh.cpp:163] : Successfully established session to 10.1.1.2
[Wed Jul 29 12:54:50 2015] (10680)[VcsuCore.cpp:2446] : No incomplete firmware updates detected.
[Wed Jul 29 12:54:50 2015] (10680)[VcsuCore.cpp:2353] : Checking state of any incompleted firmware updates.
[Wed Jul 29 12:54:51 2015] (10680)[VcsuSsh.cpp:143] : Connection established to 10.1.1.3
[Wed Jul 29 12:54:51 2015] (10680)[VcsuSsh.cpp:163] : Successfully established session to 10.1.1.3
[Wed Jul 29 12:54:51 2015] (10680)[VcsuCore.cpp:2446] : No incomplete firmware updates detected.
[Wed Jul 29 12:54:55 2015] (10680)[VcsuCore.cpp:1798] : [CZC82665GQ:1] Primary VCM Found at : 10.1.1.3
[Wed Jul 29 12:54:57 2015] (10680)[VcmWrap.cpp:1643] : VCM Firmware Version: 1.21
[Wed Jul 29 12:55:00 2015] (10680)[VcmWrap.cpp:1831] : The soap call response for showEnclosure has invalid pointer
[Wed Jul 29 12:55:01 2015] (10680)[VcsuCore.cpp:1894] : [CZC82665GQ:2] Primary VCM found
[Wed Jul 29 12:55:05 2015] (10680)[OaWrap.cpp:793] : User successfully deleted

Returned status value is 0.

 

3 REPLIES 3
Torsten.
Acclaimed Contributor

Re: HP 1/10Gb VC Enet Module 399593-B22 FW Upgrade from 1.21

What is the OA version?

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Torsten.
Acclaimed Contributor

Re: HP 1/10Gb VC Enet Module 399593-B22 FW Upgrade from 1.21

And again the release notes:

 

 

 

 

 

Beginning with VC 3.70, the HP 1/10Gb VC Enet Module (399593-B22) and the
HP 1/10Gb-F VC Enet Module (447047-B21) are no longer supported. Beginning with VC 4.10,
the HP 4Gb VC-FC Module (409513-B21) is no longer supported.


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Renato Marchesani
Occasional Advisor

Re: HP 1/10Gb VC Enet Module 399593-B22 FW Upgrade from 1.21

Hi,

thanks for the feedback. It turned out that using VCSU 1.11 was too new to detect and correctly work with the 1.21 fw.

Now, using th VCSU 1.7 I'm currently upgrading my Virtual Connect firmware to 3.10 version, hoping for everything to go as expected.

 

BTW, my OA is 4.40 :)

 

I'll keep you posted in case of any problem, menwhile thank you very much for your support!

R