BladeSystem - General
1748054 Members
4860 Online
108758 Solutions
New Discussion юеВ

Re: Leaving statistics_throughput Enabled

 
SOLVED
Go to solution
Psychonaut
Respected Contributor

Leaving statistics_throughput Enabled

Does anyone know what the performance hit is of leaving statistics enabled?  

 

The domain is at firmware level 3.51.  I am currently capturing a baseline, but I want to have the ability to pull statistics in the case of a problem and do a daily pull.  I don't have the rights to pull statistics from the Brocade or Cisco switches.

3 REPLIES 3
Hongjun Ma
Trusted Contributor

Re: Leaving statistics_throughput Enabled

Hi Psychonaut,

 

We have not heard any negative impact by turning on the stats. I don't have any quatative number but so far this feature has not caused any trouble at all.

 

upcoming VC3.70 will allow you see stats in GUI chart format

My VC blog: http://hongjunma.wordpress.com



Hongjun Ma
Trusted Contributor
Solution

Re: Leaving statistics_throughput Enabled

from dev testing, this command doesn't have more than 1% impact even with 1 min sample interval to overall system resources so it's save to enable. in VC3.70, a newly creately domain will have the setting as default on with 5-min sample rate. for vc domain upgrade from previous release, the setting is disabled by default but you can enable it manually.

My VC blog: http://hongjunma.wordpress.com



Psychonaut
Respected Contributor

Re: Leaving statistics_throughput Enabled

Thanks for doing the dev testing, that's great to know as is the time intervals.