HPE BladeSystem Virtual Connect
Showing results for 
Search instead for 
Do you mean 

VC Modules stacking between VC Flex-10 10G and HP VC Flex-10/10D

Occasional Contributor

VC Modules stacking between VC Flex-10 10G and HP VC Flex-10/10D

Hi,

 

We have one c7000 enclosure equipped with 2 x VC Flex-10 10G modules (pair) installaed in bay 1 and 2 now we have another c7000 enclosure equipped with 2 x HP VC Flex-10/10D modules in bay1 and bay2.

I want to stack both enclosures, can I stack both enclosures equipped with different VC modules ?

If yes what ports will be used to built this stacking as Flex-10 10G has cx4 port for uplink and FLex10/10D does not have this one.

 

Thanks,

Xubair.

1 REPLY
Acclaimed Contributor Acclaimed Contributor

Re: VC Modules stacking between VC Flex-10 10G and HP VC Flex-10/10D

AFAIR in a multi enclosure VC domain all enclosures must have the same module configuration (same count, same models).

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!