Virtual Connect VMware vDS LLDP

[Pedae]

Hello,

i have a BL465c G/ Blades with a Virtual Connect Profile (HP VC Flex-10 Enet Module, Firmware 4,41) assigned to it.

In vSphere vCenter i have configured a vDistributed Virtual Switch with LLDP, but i cannot see any LLDP Information (Link Layer Discovery Protocol is not available on the physical adapter)

There should be LLDP Information from the VC Module.

Peter

[Geeko]

ssh to the VCManager, use the following commands:

show lldp <PortID>

Xn for Uplink or dn for downlink, e.x. X2 or d16

To enable network loop protection, use the set loop-protect command:

>set loop-protect Enabled=true

To reset network loop protection, use the reset loop-protect command:

>reset loop-protect

Regards