BladeSystem - General
1748265 Members
3987 Online
108760 Solutions
New Discussion

Re: BL460c crashing when loading up install disk

 
rventura
Frequent Advisor

BL460c crashing when loading up install disk

Hello,

 

I have 4x BL460c Gen1. I am installing XenServer 6.5 and it succeeded in 3 of the blades. One of them keeps crashing when loading up the install disk. I've tried a new ISO, updated the firmware, and still crashing when loading up the installation environment.

 

I ran HP diags and it says everything is fine and working good. 

 

If it was because Xenserver 6.5 is not compatible with this gen blades, i cant explain why it would work on all but 1.

 

If there anything i can do to get more info about the crash? It just reboots and i cant find any logs or anything that would help me troubleshoot this.

 

Thanks

1 REPLY 1
Jimmy Vance
HPE Pro

Re: BL460c crashing when loading up install disk

Check the iLO and server IML logs

No support by private messages. Please ask the forum!