HPE BladeSystem Virtualization
Showing results for 
Search instead for 
Do you mean 

C7000 - USB hardlock virtualization

Occasional Contributor

C7000 - USB hardlock virtualization

[ Edited ]

Hi everyone,


I have vmware installed in one enclosure c7000 with 8 full-height blades. And i want to virtualize four servers that have usb hardlocks.


I recently, have tested a Sharkoon USB LANPORT 400, but doesn't work with hardlocks.


Someone know a method to virtualize this?


Thanks in advance.




Re: C7000 - USB hardlock virtualization



Try connecting directly to the Host through blade front port dongle and follow the steps as per below article: which allows to configure USB passthrough, but it has limitations on these configuration which you can find in the article.





Check with the Sharkoon USB LANPORT 400 if it supports all the device types as there could some limitation in device support, another solution which vmware certified is USB Anywhere try checking on these.




Was the post useful? Click on the white KUDOS! Star on the left side of this post.
For HP Guided Troubleshooting; http://www.hp.com/support/hpgt

I work for HP
A quick resolution to technical issues for your HP Enterprise products is just a click away HP Support Center Knowledge-base
See Self Help Post for more details