HPE BladeSystem
Showing results for 
Search instead for 
Do you mean 

BL460c iLo 4 Firmware Issue

Occasional Contributor

BL460c iLo 4 Firmware Issue

Hi All,

 

I am having an issue with an iLo firmware update on a BL460c GEN8 / iLo 4.

Currently I have updated 6 of 7 servers from iLo firmware 1.10 to 1.30 but 1 has hung.

 

For the last 2 days this has said '1% Flashing Image...' and will not change.

 

Has anyone else had this issue and how did you resolve.

I can still use the server and browse the iLo but I need this issue resolved.

 

 

Thanks in advance,

1 REPLY
Highlighted
Occasional Contributor

Re: BL460c iLo 4 Firmware Issue

This has now been resloved,

 

Although other blades took this upgrade fine I have approached this box differently.

Firstly I have pulled from the Chassy to reset all power and this stopped the iLo 4 update.

 

To get this updated I went to iLo 4 ver. 1.22 using the scexe from HP.

Then I returned once this was completed and applied the ver. 1.30 update via the iLo 4 interface again.

All went smoothly without any issues.