Error when accessing web page for OneView for vCenter 8.0.1

[Mike Vierling]

I'm using OneView for vCenter.  In OneView for VMware vCenter, I have added the the vCenter and also added the MSA 2040 storage system.  They are showing up fine in that.  When I open the vSphere web client, however, there is no HPE Management section as described in the manual. It does not show up anywhere.

[Edward L. Haletky]

Hello,

That happened to me.

Log out of vCenter Web Client. oO not just close the window do a logout, then log back in. It should appear. 

If it does not appear, I had to do the following:

I had to reinstall OV4VC... FIrst I removed vCenter from OV4VC, then I removed OV4VC. Then I went to https://vcenterip/mob, logged in and verified the extension was removed (you may have some old ones). To remove an extension using the MoB go to content, then ExtensionManager. A list appears at the top, expand that list and look for anything with hp/hpe within the name. You will need to copy the name you see and invoke the UnregisterExtension using the name you copied. To be sure, I restarted the vSphere Web Client service on vCenter.

Then I reinstalled and reconfigured OV4VC. Logging out and back in and viola it appeared.

The login/logout of the web client is important.

Best regards,

Edward L. Haletky

[jasonymy]

Hi,

After deployed Ov4VC, I can't see anything about HP/HPE in https://vcsaip/mob,but the task showed completed? That is the plug-in didn't install at all. why?