HPE Service Manager / Service Center Support and News Forum
Showing results for 
Search instead for 
Do you mean 

Application Patch for 7.11 fails to work correctly.


Application Patch for 7.11 fails to work correctly.

Hey folks,

I just discovered that the Application Patch is not working correctly.  The patch files are fine, but the mechanism to deploy is flawed and HP has no work around available at this time.



After reconciling your patches into your tailored system, you should be able to generate a custom patch for migration to your test or prod systems.  This function works only once.  If you discover later that some thing needs to be changed, you can not generate the custom patch again.  It errors out indicating that the patchreltoc already exists.  HP documentation says this is an iterative process and that you may need to generate the custom patch multiple times.  In my case that is true, but it is not possible. 


In working with support, I was unable to get a tested/proven work around in over a week.  We had to pull the patch from our current release since we couldn't get a work around.  I just wanted to be sure that no one else wasted their time with this until HP resolves the issue. 


This applies only to Windows that I know of.  If you're running on AIX, then I can't say if the process works the same.


Tim Smith

Principal Financial Group