HPE Service Manager / Service Center Support and News Forum
Showing results for 
Search instead for 
Do you mean 

Validation in FC

Regular Advisor

Validation in FC

Hi,

 

I am doing the validation for greater than 60 it should validate , i am doing in FC validation

 

Validation : $min<60 and $min>=0

Update : not null($min)

Set Focus to : $min

Message : Please enter "mins" value 0 to 60

 

Here when i enter the specific number 7,8,9  it was not validating only for these numbers

 

min= 7     // it is not accepting and getting error message

min=8     // it is not accepting and getting error message

min=9     //  it is not accepting and getting error message

min=23   // it was accepting

min=88   //validating and getting error message

 

Please help me

6 REPLIES
Honored Contributor Honored Contributor

Re: Validation in FC

This is weird, check if any other validation is put in any of the other form fc.
____________________________________
Assign Kudo, if found post useful and mark it accepted if solves the issue.
Regular Advisor

Re: Validation in FC

Hi Piku,

I checked all are getting the same, when i enter the 7,8,9 value
Honored Contributor Honored Contributor

Re: Validation in FC

logic is correct, how it is possible that validation fails only on 7,8 and 9.
Did you checked for other values too.

hth,
____________________________________
Assign Kudo, if found post useful and mark it accepted if solves the issue.
Regular Advisor

Re: Validation in FC

Hi Piku,

 

Ya i was working correctly for the other numbers between 0 to 6 and 10 to 59 it was good

 

But only 7,8,9

Honored Contributor Honored Contributor

Re: Validation in FC

did you checked other fc ?
____________________________________
Assign Kudo, if found post useful and mark it accepted if solves the issue.
Regular Advisor

Re: Validation in FC

other fc also getting the same... I dont understand why?