HPE Storage System Scripting Utility (SSSU)
Showing results for 
Search instead for 
Do you mean 

EVA Configuration backup

Occasional Contributor

EVA Configuration backup

I i tried to take the backup of EVA using SSSU by typing the command "CAPTURE CONFIGURATION'" and redirecting to a file name but while i am opening this file i cant see any configuration only i can see the below line... is the configuration is saving to some other location rather than the default folder


CAPTURE CONFIGURATION may take awhile. Do not modify configuration
until command is complete.



CAPTURE CONFIGURATION Step1A complete and successful


CAPTURE CONFIGURATION Step1B complete and successful


CAPTURE CONFIGURATION Step1C complete and successful


CAPTURE CONFIGURATION Step2 complete and successful


CAPTURE CONFIGURATION Step3 complete and successful



Please give suggestions


Re: EVA Configuration backup



Please check the correct syntax of the command.


The scripts output to the console unless you specify a file name. The file name is appended with
_StepXX. XX is the restore step name, which is 1A, 1B, 1C, 2, or 3. For example, if you specify
CAPTURE CONFIGURATION newyear.txt, SSSU creates the files newyear_Step1A.txt,newyear_Step1B.txt, newyear_Step1C.txt, newyear_Step2.txt, and



Details in reference guide at http://bizsupport1.austin.hp.com/bc/docs/support/SupportManual/c02493404/c02493404.pdf


If this post was useful , click the Kudos Star on the left side to say Thanks!