view all LUNS in eva3000

[xorras]

Hello everyone.
 
Anyone know if there is a program or a command option in the view to see all the LUNS and ability on a EVA3000??

P.S. This thread has been moved from Storage > General to HP Storage System Scripting Utility (SSSU).
-HP Forum Moderator

[Torsten.]

Open command view -> virtual disks and you will see all LUNs (vdisks) inside the EVA.

[xorras]

but there is a way to have a list of all luns with their abilities

[Torsten. · Accepted solution]

I guess the SSSU command "ls vdisk" or "ls lun" will give you the needed information.

[kuldeep_s]

Hi Team,

I have installed comamnd view Version: 6.0.2.37 on window 2008 server. This server has one emulax 8 Gbps fibre adapter conntected throught mcdata switch. One port of each controller is zoned to this server. I am not able to discover HP EVA san storage. Please help me get the any diagnostcis doc for troubleshooting it.

Kuldeep

[Torsten.]

Your command view is most likely much too old.

Try Command View 10.3 from software hp.com

[kuldeep_s]

Thanks for reply. Actually we are using this box only for backup and does,t want to invest much in it. Please suggest if there is some thing I can check.

Thanks

[Torsten.]

If the XCS version of the array is too new for your command view version, CV will not find the array.
This is the situation you have.
Try CV10.3, it is free to trial.

[kuldeep_s]

Thanks. I will try it and will let you know the status, But It is working on another 2003 server which we have plan to shutdown.

[Torsten.]

So please get the XCS version from the other CV session and tell.