StoreVirtual Storage
1748202 Members
3076 Online
108759 Solutions
New Discussion юеВ

HP 4300 G2 Event codes:E00030100

 
Petie
Occasional Contributor

HP 4300 G2 Event codes:E00030100

Hi I am having errors on my system displaying E00000300 EID_MG_CONNECTION_STATUS_DOWN, I am running a FOM installed with Vmware2, this system is also running Backup Exec. Seems to be more of an when the backup is running, could the error be relating to a I/O delay effecting the system that is running in Vmware.

I have tried to find event codes but did not find any in the documentation. Please any help would be appreciated.
7 REPLIES 7
Rafael Fonseca
Occasional Advisor

Re: HP 4300 G2 Event codes:E00030100

Yuler
Occasional Visitor

Re: HP 4300 G2 Event codes:E00030100

Still no answear to this issue?

Foduro
New Member

Re: HP 4300 G2 Event codes:E00030100

I have either the same issue (but on an HP P4000) or very similar one and I'm wondering if anyone has some additional information. This error or alert is being triggered daily and I still can't figure it out. In some cases two to three times a day even: 

 

Subject: Quorum communication status for manager 'x.x.x.x' in management group 'XXXX' is 'Down'. WARNING (E00000300)


Event : E00000300 EID_MG_CONNECTION_STATUS_DOWN
Severity : Warning
Component : SAN/iQ
Object Type : Management Group
Object Name : XXXX
Management Group : XXXX
Cluster : XXXX-XX
IP/Hostname : XXXX.domain.com
Date and Time : 03/01/2013 07:16:51 GMT
User : System
Resolution : http://h20000.www2.hp.com/bizsupport/site/search/r4_0/jsp/search.jsp?lang=en&cc=US&pc=0&sc=2&cf=1&cm=1&cs=1&c130=1&c115=1&c110=1&c120=1&nh=10&rf=0&lkc=1&lk=1&tx=E00000300
Message : The quorum communication status for manager 'x.x.x.x' in management group 'XXXX' is 'Down'. Manager 'x.x.x.x' cannot communicate with managers 'XXXX, XXXX'.

 

The link above; as you will find out; leads to a page that cannot be found. Any information is very much appreciated. 

 

Thank you

Yuler
Occasional Visitor

Re: HP 4300 G2 Event codes:E00030100

Maybe it is due to the high I/O when backing up. I also use Symantec BE.

hhth
Visitor

Re: HP 4300 G2 Event codes:E00030100

same here during Symantec BE Backups of VM's (Hyper-V)

StClairCounty
Occasional Visitor

Re: HP 4300 G2 Event codes:E00030100

I never found any type of resolution to this, I still have a 4350 and it reboots every day with the same error.

http://h20000.www2.hp.com/bizsupport/site/search/r4_0/jsp/search.jsp?lang=en&cc=US&pc=0&sc=2&cf=1&cm=1&cs=1&c130=1&c115=1&c110=1&c120=1&nh=10&rf=0&lkc=1&lk=1&tx=E00060202

we also use this for backups with Rapid Recovery.

I can find no hint of what is going on.

Assen
HPE Pro

Re: HP 4300 G2 Event codes:E00030100

Are you by any chance also doing a backup of the FOM? If you do, this is wrong. Don't backup the FOM!

If the FOM dies, just install a new one. 

Cheers,

Assen


I am an HPE employee
[Any personal opinions expressed are mine, and not official statements on behalf of Hewlett Packard Enterprise]

Accept or Kudo