Deploy tagged vlans to ports with UAM for IP-Phone

[spag]

Hi,

Actually i replace a PCM/IDM's server to a IMC/UAM's server (IMC = 7.1 E0303P10 and UAM = 7.1 E0302P17).

All my switch are Procurve's product

In the IDM module of PCM, i can assign a tagged vlan for my ip-phone after the dot1x success authentication.

With the UAM module, i can deploy a untagged vlan under the "Deploy vlan" option of the access policy. But i can't assigne a tag vlan for my ip-phone.

i seen this topic http://community.hpe.com/t5/IMC/Deploy-tagged-vlans-to-ports-with-UAM-as-part-of-a-service/td-p/6593386 but i don't succeed the task.

Somebody can help me for deploy a tag vlan on my Procurve switch with the UAM?

Have you a screenshot of this task procedure?

Thanks.

[NeilR · Accepted solution]

The UAM stuff has gotten re-arranged  a bit during some of the version changes. Here are screen shots of the settings I'm currently using in 7.1 - hope it helps

I used the VLAN by name method as its a easier on the IMC side to configure, but it does require consistent naming.

[spag]

Thanks a lot NeilR

;-)