1748027 Members
4599 Online
108757 Solutions
New Discussion

HPE IMC NTA - No Data Displayed

 
MrXYZ
Occasional Contributor

HPE IMC NTA - No Data Displayed

Trying to make NTA work here on HPE IMC on a 5120 HP switch.

Looking for the detailed steps of how to do it from HPE.

But so far no luck after three days of searching.

Suspect there is a SNMP mismatch between the device I need to monitor (HP 5120 switch) and IMC.

Why does HPE not put the detailed steps with an example of how to do it?

=====================================================

I have a Cisco device showing some data on the graph in IMC NTA but trying to acheive the same thing with a HP device is more difficult.

Both the Cisco switch and the HP switch are using SNMPv3.

The firewall between the server hosting IMC and the switches I am attempting to monitor has been configured to allow UDP 6343 traffic through.

 

 

 

 

 

 

 

1 REPLY 1
LindsayHill
Honored Contributor

Re: HPE IMC NTA - No Data Displayed


@MrXYZ wrote:

Suspect there is a SNMP mismatch between the device I need to monitor (HP 5120 switch) and IMC.

What leads you down that line of thinking? Any particular errors?

Why does HPE not put the detailed steps with an example of how to do it?

=====================================================

This video is for IMC 5.2, but it goes through the steps

https://www.youtube.com/watch?v=-TG8fpbxRv8