IMC
Showing results for 
Search instead for 
Do you mean 

Setting Java Heap Size for HP IMC

SOLVED
Go to Solution
Occasional Visitor

Setting Java Heap Size for HP IMC

The IMC installation guide lists the required Java Heap Size for IMC, but I cannot find any guide on how to set it.

 

Any usefull info or tips would be greatly appreciated.

1 ACCEPTED SOLUTIONS
Honored Contributor

Re: Setting Java Heap Size for HP IMC

You can manually edit the startup parameters, or you can use the "setmem.bat" script to do this for you.

 

Go to <IMC>\client\bin.

Run "setmem.bat 4096" to set the heap size to 4G. Run setmem.bat with no arguments to see usage info.

 

On Linux you can use setmem.sh, in the same directory.

CCIE 36708 | @northlandboy | lkhill.com
3 REPLIES
Honored Contributor

Re: Setting Java Heap Size for HP IMC

You can manually edit the startup parameters, or you can use the "setmem.bat" script to do this for you.

 

Go to <IMC>\client\bin.

Run "setmem.bat 4096" to set the heap size to 4G. Run setmem.bat with no arguments to see usage info.

 

On Linux you can use setmem.sh, in the same directory.

CCIE 36708 | @northlandboy | lkhill.com
Occasional Visitor

Re: Setting Java Heap Size for HP IMC

Perfect, thank you!

 

This was not mentioned in the Training Course nor in the Training Manuals. I will mention this in the feedback to HP Training.

 

Thanks again!

Highlighted
Honored Contributor

Re: Setting Java Heap Size for HP IMC

No worries.

I can't remember exactly where I picked it up, but it's in the Getting Started guide, in the FAQ section. Should probably be in the Admin or Install guide too.
CCIE 36708 | @northlandboy | lkhill.com