ITRC ProLiant Deployment and Provisioning Forum
Showing results for 
Search instead for 
Do you mean 

HP SPP scripting and starting HPSUM

Occasional Contributor

HP SPP scripting and starting HPSUM

Using the SPP2012010.2012_0119.47.iso, Im PXE booting it in a Linux environment. I want to control how the HPSUM is run.


Is there some scripting toolkit that works with SPP and HPSUM?


For example,


 How can I change the log location so it goes to my NFS mounted PBShost instead of the local drive.


 How can I change it so it doesn't set the ontime boot to harddisk  after a successful firmware update?


 How can I get the status tof the HPSUM run back to my PXEhost?


Re: HP SPP scripting and starting HPSUM

I think you'll have to roll your own solution for the time being.  You can use the Linux toolkit as a starting point to write your own bash scripts to glue everything together.


General strategy:

  1. PXE boot the toolkit

  2. Mount the SPP iso (nfs, cifs, others...) and copy the contents to the ramdisk or other local location.

  3. run hpsum in silent mode ( i.e. ./hpsum /s /inputfile input.txt ).

  4. Send logs and status back to your PBShost / PXEhost.


Hope that helps.