HPE Community
Server Management - Remote Server Management
1755738 Members
3177 Online
108837 Solutions
New Discussion

Re: ILO2 firmware update caues BMC IPMI Watchdog Timer Timeout: Action=System Power Reset

 
Patrick Metcalfe
New Member

‎02-26-2010 02:54 AM

‎02-26-2010 02:54 AM

Re: ILO2 firmware update caues BMC IPMI Watchdog Timer Timeout: Action=System Power Reset

Had similiar issues - look at this link for Blade Servers probably works for DL380 Server also

http://h20000.www2.hp.com/bc/docs/support/SupportManual/c01723453/c01723453.pdf

http://h18004.www1.hp.com/products/blades/components/c-class.html

See also attached document


0 Kudos
Reply
8i5
Advisor

‎03-19-2010 10:51 PM

‎03-19-2010 10:51 PM

Re: ILO2 firmware update caues BMC IPMI Watchdog Timer Timeout: Action=System Power Reset

Those compatibility matrix docs are standard and if you don't follow them you will always be looking for trouble.

The latest I've been told by HP for my up to date blade servers which are experiencinig this issue is to downgrade the ilo management controller driver to 1.8.0.0 then upgrade back up to 1.13.0.0 again. I cannot imagine how this will help but will try it if the issue persists.
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.