Server Management (Insight Manager 7)
1748284 Members
3454 Online
108761 Solutions
New Discussion юеВ

Re: MSCS idetification (Cluster Monitor) in CIM7

 
Ayman Altounji
Valued Contributor

MSCS idetification (Cluster Monitor) in CIM7

I have a problem with the IM7 and MSCS .

When i discover the server with insightAgents V5.50 and ClusterAdministrator V2.1d on it over the "Auto Discover" in IM 7 i only become the physical maschines in the IM7 not the virtual maschine (Cluster Server). When i will use the "Cluster Monitor" inside the IM7 i must put the clustermaschine-names with the "cluster monitor -User Settings" into the IM7. But there are no device displayed. When i manually put the Cluster-IP-Adress and Name into the DB with add devices there is a conflict with the physical maschine in the DB thant have aready the ip-adress of the cluster.

Where is the problem, what must i do.

Frank Heubaum
Bonndata GmbH
2 REPLIES 2
Ayman Altounji
Valued Contributor

Re: MSCS idetification (Cluster Monitor) in CIM7

Make sure your cluster information service is activated under Control Panel/Compaq Management Agents.
Ayman Altounji
Valued Contributor

Re: MSCS idetification (Cluster Monitor) in CIM7

The Insight Agent are configured to view the Cluster, thats not the problem.

The problem is the CIM7 discovery i think.

Frank Heubaum