Registering RFC1628 MIB

[Markus Roth]

Hello,

I have some problems to register the UPS-MIB (rfc1628).

I used mcompile to create the cfg-file and receives no error message. But after I tried to register the cfg-file with mxmib I received the mesage: "IMPORTING CFG rfc1628.cfg
Error reading CFG: MIB node has no parent Line: 76.
AN ERROR OCCURRED EXECUTING THE COMMAND"

The line 76 shows: "upsMIB OBJECT IDENTIFIER ::= { mib-2 33 }"

Does anyone knows what I have to do to solve this problem and successfully register this mib?
I'm using HP SIM5.0

Thank you for your help
Markus

[Maurice Skubski_1]

hm, is there a error in the mib. please check this: http://www.faqs.org/rfcs/rfc1628.html
ms

[Markus Roth]

My MIB is identical to this MIB

[Peter_351]

I just ran into this same problem yesterday installing MIBs for our Liebert UPS. I wound up having to contact them to get corrected files to use with SIM.

[Paul Kratz]

I have the some Problem.

Did you find a solution?
Did you call HP and open a call?

[Markus Roth]

Yes I've called HP Support.

They told me that I should call the vendor of the MIB !!

It is not a problem of HP SIM ??!!

I will open a online request to HP Support again.

[Markus Banfi_1]

Hi,

we have the same problem here.
Did you find any solution?


Best regards,
-Markus-

[Markus Roth]

The vondor of the mib sent me an special mib for HP SIM.

This was the solution of my problem.

HP Support gave me no feedback!

[Markus Banfi_1]

Hi,

Thanks for the info.
Meanwhile I figured it out. I had to insert a line into the .cfg file before the one SIM said is in error:

mib-2 OBJECT IDENTIFIER ::= { mgmt 1 }

After this importing (mxmib -a) worked.

-Markus-