Server Management - Systems Insight Manager
1748128 Members
3357 Online
108758 Solutions
New Discussion юеВ

Re: Using SIM to Configure New Bladesystems

 
mks
Occasional Contributor

Using SIM to Configure New Bladesystems

I am hoping to use SIM to configure new bladesystems as they are installed. Right now I am getting this error. What am I missing?

This tool cannot run on SERVERENC3 as it does not pass the conditions required for running it.

SMH must be greater than or equal to : 1

AND

compaq.cimom.supported must equal : true



The properties that SERVERENC3 has for the failing conditions :
SMH: Not installed
compaq.cimom.supported: null.
4 REPLIES 4
PNair
Frequent Advisor

Re: Using SIM to Configure New Bladesystems

What are you trying to configure and what tool are you trying to run?
WilliamCH
Occasional Advisor

Re: Using SIM to Configure New Bladesystems

I got the exact same problem while I was working on "replicate Agent settings" on SIM 5.3 sp1.
any solutions? thx.
David Claypool
Honored Contributor

Re: Using SIM to Configure New Bladesystems

There's very little HP SIM can do to a system without an operating system. What are you trying to do? Deploy a hardware config (BIOS settings, RAID setup) and the OS? That's done through the Insight Control server deployment function.
WilliamCH
Occasional Advisor

Re: Using SIM to Configure New Bladesystems

Thanks for your reply.
The managed system has Windows 2003 and PSP installed. I was trying to push Version Conrol Agent settings from HP SIM CMS server to managed system using "Replicate agent setting". The error message appeared while I selected the managed system as the target server for agent settings replication.

Actually the problem fixed after I "identify" the managed system through Options on CMS.