Version Control Agent problem

[denis Katramados]

I have HP Version Control Repository Manager (version 2.1.10.800)and Version Control Agent (2.1.9.791).
The problem is that the Version Control Agent on managed servers does not work except from the one that has installed the HP Version Control Repository Manager.I believe that is the firewall who is blocking it but i don't know the port that has to be opened.


Thank you

P.S. This thread has been moved from ITRC server mgmt (Insight Manager 7) Forum to ITRC HP Systems Insight Manager Forum - HP Forums Moderator

[Predator · Accepted solution]

Hi Denis,

Please modify your firewall to allow traffic through port 2381(TCP). This is the port number which SMH uses to communicate through which VC also.
This might solve your problem.

[denis Katramados]

Thank you for the information.
Do you know if it is tcp or udp port 2381 and does it has to be incoming and/or outgoing in both sides vca and vcrm?

[Predator]

As I mentioned in my previous reply, its tcp port 2381. Configure your firewall to allow both incoming and outgoing traffic through tcp port 2381.

Fingers crossed :-)
All the best !!

[Maxim Revutskiy]

As i figured through tcpdump, vca mostly use tcp port 2381 (https), but it sends few packets on 2301 (http).