1752590 Members
3990 Online
108788 Solutions
New Discussion юеВ

Crash Recovery

 
Crash Recovery
New Member

Crash Recovery

HI, MY HP-rp4440 crashed yesterday. I have an ignite of root vg of the crashed system. I have another system HP-rp2470 running. Can I use that ignite image on rp2470??? Will it work???Plz help
5 REPLIES 5
Torsten.
Acclaimed Contributor

Re: Crash Recovery

The rp2470 image on the rp4440? You need to try this. It needs to be 11.11 minimum.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Crash Recovery
New Member

Re: Crash Recovery

No, i want rp4440 ignite image on tape to apply on rp2470. I have HP-Unix Version B.11.11 installed. Plz tell me the steps
Torsten.
Acclaimed Contributor

Re: Crash Recovery

Stop at boot menu and boot from tape. Stop at install menu if needed and do the adjustments.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Crash Recovery
New Member

Re: Crash Recovery

kindly provide more detail.
Torsten.
Acclaimed Contributor

Re: Crash Recovery

Refer to the ignite manual:

http://www.hp.com/go/ignite-UX

Stop at boot menu and do a "search", then select the sequential boot device.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!