install hp-ux 11iv2 using network

[rajesh73]

HI,
I need to install hp-ux 11i v2 through lan boot. I don't have external DVD so I plan to mount the DVD to some other server and through LAN. it is possible

[Dennis Handly]

I've never heard of using a remote DVD, just ignite and a filesystem.

[Bill Hassell]

The lanboot capability requires another HP-UX system setup with Ignite/UX and the Install DVD copied to the Ignite server as a Golden Image. If the hardware you have is a blade, you may be thinking of virtual media that uses the blade chassis and an external web interface.

[Torsten.]

You can copy the install media using the ignite interface to the install source server or use a golden image. Not only blades have virtual media, other servers have this feature too, deoending on the model you have.

[rajesh73]

Could you please share the procedure

[pradeep m]

Please refer the ignite-ux administrator guide for the steps to create golden images n ignite-ux server.
http://h20565.www2.hp.com/hpsc/doc/public/display?docId=emr_na-c03701923
Refer the below white paper for using golden images with vPars.
http://h20565.www2.hp.com/hpsc/doc/public/display?docId=emr_na-c02018871