1748157 Members
4114 Online
108758 Solutions
New Discussion юеВ

make_recovery warning

 
SOLVED
Go to solution
Troyan Krastev
Regular Advisor

make_recovery warning

During our make_recovery, I received the following errors -- please let me know the criticality.
------------------
WARNING: data collection did not complete within interval!
------------------

Thanks,
Troy
3 REPLIES 3
Jason VanDerMark
Trusted Contributor

Re: make_recovery warning

When make_recovery runs, the process is broken up into collection cycles. The process sleeps between each cycle. If a collection cycle doesn't finish within the window expected it will give you a warning. From what I can tell, this is nothing to worry about and shouldn't hurt anything with your make_recovery. If someone else has something that says differently, please let me know. Hope this helps.

Regards,
Jason V.
Tie two birds together, eventhough they have four wings, they cannot fly.
Michael Roberts_3
Honored Contributor
Solution

Re: make_recovery warning

That message isn't coming from make_recovery, no where in our code do I find such a thing.

What other software is loaded on your box? (which OS rev?)

Do you have some application or daemon that is collecting system info?

Do you see this while makeing the tape or recovering from it?
etouq ot hguone revelc ton m'i
Troyan Krastev
Regular Advisor

Re: make_recovery warning

I have MRTG installed on this box and this message is from it! I think that the box is to slow ( 9000/816/E35)!

Thanks