Install/Update OS and Patching
Showing results for 
Search instead for 
Do you mean 

MPE - Instalation

SOLVED
Go to Solution
Super Advisor

MPE - Instalation

Hi there
I have an HP -3000 server, the disk has been wiped and I'm not familiar with installation of MPE.

Where to get an installation files, how to start etc.

Bets regards
Jesus is the King
1 ACCEPTED SOLUTIONS
Esteemed Contributor Esteemed Contributor

Re: MPE - Instalation

Piotr,

If you have HP support, now would probably be an excellent time to open a call with them.

Do you have any tapes - a full backup or a tape labelled SLT perhaps?

How long ago was the system up and running?

Dan
3 REPLIES
Esteemed Contributor Esteemed Contributor

Re: MPE - Instalation

Piotr,

If you have HP support, now would probably be an excellent time to open a call with them.

Do you have any tapes - a full backup or a tape labelled SLT perhaps?

How long ago was the system up and running?

Dan
Super Advisor

Re: MPE - Instalation

I'm using this system only for training purposes.
I have a tape labeled as iX 6.0.
But have no idea how to start.

Jesus is the King
Highlighted
Honored Contributor Honored Contributor

Re: MPE - Instalation

Hello Piotr,

It looks like you'll have to start from scratch.

I recommend you follow Chapter #2 "Checklist K - Install a new system" of the "HP 3000 MPE/iX Release 6.0 System Software Maintenance Manual (Release C.60.00)" available right here : http://docs.hp.com/en/30216-90272/index.html

You may choose to use "Checklist J - Reinstall using a CSLT" should you have a current IO configuration & CSLT tapes.

Hope this helps. Good Luck.
King is the customer!