Install/Update OS and Patching
Showing results for 
Search instead for 
Do you mean 

System abort 55 from subsystem 146

SOLVED
Go to Solution
Advisor

System abort 55 from subsystem 146

Hi, I have a system disk crashed and am trying to re-install MPE from SLT tape created from the same system on the new disk with the same model. After booting from tape and run install, the process halted with: System abort 55 from sub system 146. FLT 0137 BF07... Any help is much appreciated. Thank you in advance.
1 ACCEPTED SOLUTION
Honored Contributor Honored Contributor

Re: System abort 55 from subsystem 146

Hello David,

System Abort #55 means "An error occurred in CONFIGURE_DEVICE".

Subsystem is "Genesis".

Based to the abort number, it looks like the boot process cannot talk to the new disk. make sure the new disk matches the configuration (hardware path, sysgen ID)that is on the CSLT tape.
King is the customer!
3 REPLIES
Honored Contributor Honored Contributor

Re: System abort 55 from subsystem 146

Hello David,

System Abort #55 means "An error occurred in CONFIGURE_DEVICE".

Subsystem is "Genesis".

Based to the abort number, it looks like the boot process cannot talk to the new disk. make sure the new disk matches the configuration (hardware path, sysgen ID)that is on the CSLT tape.
King is the customer!
Advisor

Re: System abort 55 from subsystem 146

Thanks for the reply. It's not only the problem with the SCSI disk but the SCSI controller also went bad. Thanks again.
Highlighted
Advisor

Re: System abort 55 from subsystem 146

Thanks for the reply. I found out that not only the SCSI disk was bad but the SCSI controller went bad too. Thanks again.