Integrity Servers
1748244 Members
3772 Online
108760 Solutions
New Discussion

Re: RX2800 console through MP and VGA

 
hweston
Occasional Contributor

RX2800 console through MP and VGA

RX2800 i2 with OpenVMS

 

From my understanding, the console can be either the MP or VGA, but not both.  Is this understanding correct?

 

My concern is this:

 

After changing the primary console to the MP, VGA console output stops when the OS is booted.  So during boot, until the vms login window appears, it just sits there like it is frozen.

3 REPLIES 3
Torsten.
Acclaimed Contributor

Re: RX2800 console through MP and VGA

It is correct, AFAIK.

But with the MP as console you can watch the boot process from ILO/MP and it is recorded in the console log.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
hweston
Occasional Contributor

Re: RX2800 console through MP and VGA

Thank you!  I just wanted to make sure.

S_Logan
HPE Pro

Re: RX2800 console through MP and VGA

Hi ,

 

Using the collowing command you can specify which output should be your primary "EFI Shell> conconfig"

Regards,
S_logan

I work for HPE

Accept or Kudo


[Any personal opinions expressed are mine, and not official statements on behalf of Hewlett Packard Enterprise]