rx2800 P410i Controller

[Carlo1]

I have a rx2800 integrity server with a Smart Array P410i Controller.

At start I have the Controller in HBA mode

How to change the mode in RAID?

I already update SAS io firmware at version 6.42, but the EFI Shell not recognize the "saupdate" command

the UEFI Revision is 2.30

thank you for the answer

best regards

Carlo

[Carlo1 · Accepted solution]

I solved!!!!

The problem was that i follow the instruction of installation:

Note: After installation is completed the firmware files from EFI partition should be manually deleted, to delete the files use "/usr/sbin/efi_rm -d /dev/rdisk/disk1_p1 /efi/hp/firmware/<file_name> " and to remove dir use "/usr/sbin/efi_rmdir -d /dev/rdisk/disk1_p1 /efi/hp/firmware/"

in this way i delete also the "saupdate.efi" file.

I copy in EFI this file and so I have the command.

fs0:\saupdate set_mode p410i raid

bye

Carlo