Integrity Servers
Showing results for 
Search instead for 
Do you mean 

rx4640 ULTRA320 SCSI ADAPTER HDD speed

SOLVED
Go to Solution
Highlighted
Occasional Visitor

rx4640 ULTRA320 SCSI ADAPTER HDD speed

Hi

 

I have 2 absolutely same rx4640 servers with same hardware. Today I reboot one server and see that it's HDD works on low speed (80 MB/s). I made an ivstigation and find this result:

 

Server 1:

 

# mptconfig /dev/mpt2

 Device File                   : /dev/mpt2
 Hardware Path                 : 0/1/1/0

---- BUS PARAMETERS ----------------------------------------------------------

 Initiator SCSI ID             : 7
 SCSI Bus Rate                 : Ultra320
 SCSI Bus Width                : Wide

---- TARGET PARAMETERS -------------------------------------------------------
 Target   Description        Firmware  In Use     In Use
   Id                        Version   Rate       Width
------------------------------------------------------------------------------
    0     ST373454LC         HPC2      Ultra320   Wide
    1     ST373454LC         HPC2      Ultra320   Wide

------------------------------------------------------------------------------

Server 2:

# mptconfig /dev/mpt2

 Device File                   : /dev/mpt2
 Hardware Path                 : 0/1/1/0

---- BUS PARAMETERS ----------------------------------------------------------

 Initiator SCSI ID             : 7
 SCSI Bus Rate                 : Ultra2
 SCSI Bus Width                : Wide

---- TARGET PARAMETERS -------------------------------------------------------
 Target   Description        Firmware  In Use     In Use
   Id                        Version   Rate       Width
------------------------------------------------------------------------------
    0     ST373454LC         HPC2      Ultra2     Wide
    1     ST373454LC         HPC2      Ultra2     Wide

Hardware is same.

 

Why one server 2 SCSI Bus Rate is Ultra2?

2 REPLIES
Acclaimed Contributor Acclaimed Contributor

Re: rx4640 ULTRA320 SCSI ADAPTER HDD speed

Try to set a new value.

 

# mptconfig
 Usage: mptconfig [options] <dev_file>
        <dev_file>  = /dev/mptX

 Options:
   -i initiator_id = 0 to 15
   -t target_id    = 0 to 15
   -r rate         = ultra|ultra2|ultra160|ultra320
   -w width        = narrow|wide
   -d set default values for scsi bus
       default values are:
       initiator_id = 7
       rate         = ultra320
       width        = wide

 

and check if it stays with the values.


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Occasional Visitor

Re: rx4640 ULTRA320 SCSI ADAPTER HDD speed

Thank you. This helps.