Itanium Based Servers (Retired)
Showing results for 
Search instead for 
Do you mean 

IPMI Type-E0 Event

Regular Advisor

IPMI Type-E0 Event

I get this message in CM event log on a rx2600

Log Entry 669: 25 Feb 2008 16:20:29
Alert Level 7: Fatal
Keyword: IPMI Type-E0 Event
Logged by: Unknown 0
Data: Major change in system state - State Change
0xF4801C3100E03200 000000000019100C

the system does not boot up, how can I decode this error ?

thanks
TonyD
2 REPLIES
Honored Contributor Honored Contributor

Re: IPMI Type-E0 Event

Tony,

you should collect a bigger part of the log (before this event) and/or open a support call.

This system likely went down with a MCA (Machine Check Abort).

Kris
Regular Advisor

Re: IPMI Type-E0 Event

back in the log a little way I have these events.

Log Entry 657: 25 Feb 2008 16:20:27
Alert Level 7: Fatal
Keyword: INIT_INITIATED
INIT initiated
Logged by: System Firmware 0
Data: Implementation dependent data field
0xF680007900E03080 0000000000000000


Log Entry 656: 25 Feb 2008 16:20:27
Alert Level 7: Fatal
Keyword: Type-02 136f03 1273603
INIT Initiated
Logged by: Redundant w/ an E0 code;
Sensor: Critical Interrupt
Data1: Software NMI
Data2: OEM Code1: 0x3FOEM Code2: 0x01
0xC147C2EACB023070 013FA36F00130300

Log Entry 655: 25 Feb 2008 16:20:27
Alert Level 7: Fatal
Keyword: Type-02 136f03 1273603
INIT Initiated
Logged by: Redundant w/ an E0 code;
Sensor: Critical Interrupt
Data1: Software NMI
Data2: OEM Code1: 0x3FOEM Code2: 0x00
0xC147C2EACB023060 003FA36F00130300


Log Entry 654: 25 Feb 2008 16:20:27
Alert Level 5: Critical
Keyword: Type-02 136f00 1273600
TOC interrupt (crash dump)
Logged by: Baseboard Management Controller;
Sensor: Critical Interrupt - TOC Interrupt
Data1: Front Panel NMI/Diagnostic Interrupt
Data2: OEM Code2: 0x02
0x2047C2EACB023050 02FF206FFB130300


thanks
TonyD